Printer configurations, Printer configurations -7 – Xerox 92C User Manual

Page 43

Advertising
background image

Printer components and options

System Overview Guide

3-7

CCU changeout

cart

The cart is used to remove and install the customer changeable
unit (CCU). The CCU consists of the color developer housing
and the dry ink bottle. Because the CCU is heavy, the user will
need the cart to make the change.

The carts also serve as storage devices for the CCUs that are
not currently in use. For example, if you use both the red and
blue dry inks in your operation, one CCU is always out of the
machine in storage on the cart while the other CCU is installed.

Figure 3-4. CCU on cart

NOTE: You should have a cart for each CCU so that a cart is
always available to remove the CCU that is installed in the
system. You may not need a cart for each CCU if only one color
is used or if there is more than one color printer at your site.
Consult your site representative for more details.

Printer configurations

The NPS/IPS may be configured with a high-capacity feeder, a
dual stacker, a wire stitcher/stacker, or a bypass transport with a
dual stacker.

Advertising
This manual is related to the following products: