Yamaha E580 User Manual
Page 21
1
Power Switch
* STANDBY Mode (Europe model only)
While the power is on, pressing the POWER key on the remote
control unit switches the unit to the STANDBY mode. (In this
mode, the indicator is half illuminated.)
2
Remote control sensor
Signals from the remote control unit are received here.
3
Display Panel
Shows program names, parameters and information about other
various settings and adjustments.
4
PRO LOGIC Indicator
Illuminates while the built-in Dolby Pro Logic Surround Decoder is
being activated.
5
DSP Indicator
Illuminates while the built-in Sound Field Processor is being
activated.
6
Program Selector
Sequentially selects the digital sound field processing
programs in the + or – direction.
7
Effect Switch
Normally ON, this switch can be turned OFF to disable output
from the center and effect speakers so that the sound
becomes normal 2-channel stereo.
8
Tape Monitor Switch
Used when you have connected the tape deck to this unit’s
TAPE terminals to select that tape as the source. (See page 12
and 24.)
9
Master Volume Control
Simultaneously controls signal level at all outputs: main, rear
effect, center, and subwoofer. (This does not affect TAPE REC
OUT level.)
19