Zanussi ZHC 9254X - Manual (Page 12)

12
Warning
• Failure to observe the instructions on cleaning
the unit and changing the filters will cause a
fire hazard. You are therefore strongly
recommended to follow these instructions.
• The manufacturer declines all responsibility
for any damage to the motor or any fire
damage linked to inappropriate maintenance
or failure to observe the above safety
recommendations.
Changing the light bulb(s)
• Disconnect the cooker hood from the
mains supply.
• Prior to touching the light bulbs ensure
they are cooled down.
Cleaning the hood
• Clean the outside of the hood using a damp cloth and a solution of water and mild washing up
liquid.
• Never use corrosive, abrasive or flammable cleaning products or products containing bleach.
• Never insert pointed objects in the motor’s protective grid.
• Only ever clean the switch panel and filter grill using a damp cloth and mild washing up liquid.
• Clean all the plastic parts with a soft cloth soaked in warm water and neutral soap.
• It is extremely important to clean the unit and change the filters at the recommended intervals.
Failure to do so will cause grease deposits to build up that could constitute a fire hazard.
• Replace the old bulb with a new one of the
same type.
• If the light does not come on, make sure the
bulb has been inserted in correctly before
contacting your local Service Force Centre.