Zanussi ZHC 9254X - Manual (Page 19)

19
• Make the flue slide so that the bend of the section of the lower flue fits into the bend of the fixing
bracket of the mantle (17).
Note: during this operation pull the upper flue out for a few centimetres to ease the fitting
operation.
• Extract the upper flue and fix it high on flues support bracket G with 2 screws (one per side - 18).
• Fix the flue below with 2 screws (1 per side - 19).
Mount the carbon filter frame (only filtering version) and the anti-fat filter again.
Connect the hood to the mains electricity and check, finally, that it is functioning well.
17
18
18
19
2 x Ø 2,9x6,5
2 x Ø 2,9x6,5