Powering up the spire cx260, Basic and pro basic configurations – Xerox DocuColor 252 User Manual
Page 17
Step 1: Powering Up the Spire CX260
5
Engl
ish (EN)
Engli
sh
(EN
)
Powering Up the Spire CX260
Basic and Pro Basic Configurations
¾
Do one of the following actions:
Turn on the Xerox DocuColor 242/252/260 printer/copier.
The Spire CX260 turns on automatically when the Xerox
DocuColor 242/252/260 printer/copier is turned on.
Push the On/Off button on the front of the Spire CX260.
The Spire CX260 automatically turns on and the Xerox DocuColor
242/252/260 printer/copier prints a test page.
Control Station and Pro Control Station Configurations
1.
Turn on the monitor.
2.
Do one of the following actions:
•
Turn on the Xerox DocuColor 242/252/260 printer/copier.
The Spire CX260 turns on automatically when the Xerox
DocuColor 242/252/260 printer/copier is turned on.
•
Push the On/Off button on the front of the Spire CX260.
Note: The Spire CX260 can be turned on when the Xerox DocuColor
242/252/260 printer/copier is turned off. In this state, the server runs
until turned off manually by the user. If the server is running and the
printer is then turned on, the server continues running and is not
affected by this action.