Cclle ea an niin ng g t th he e d dr ru um m – Zanussi TCE7227W User Manual

Page 11

Advertising
background image

11

Clean it with a brush and rinse it under the shower if
necessary.

Also clean the outside, removing all fluff.

Clean the rubber seal round the condenser cabinet
and in the inner part of the small door with a damp
cloth.

Important! Do not use pointed objects or utensils to
clean the spaces between the plates, as this could
damage the condenser and make it permeable.

Re-fit the condenser, turn the red stops upwards and
close the door.

Do not use this appliance if the condenser

has not been fitted.

E

Em

mp

pt

ty

yiin

ng

g t

th

he

e w

wa

at

te

er

r

r

re

es

se

er

rv

vo

oiir

r

Water extracted from the laundry condenses inside
the machine and is collected in a reservoir.
The reservoir must be emptied after each drying
cycle
to ensure efficient operation when the machine
is next used. The pilot light

(Water reservoir full)

reminds you this operation.

Proceed as follows:

• Pull out the reservoir

• Turn it upside down and let water flow down

• Re-fit the reservoir

The reservoir must be re-inserted correctly.

If this is not done the pilot light

comes on during

next drying and the programme stops, leaving the
laundry damp. The buzzer will sound.

After emptying and inserting the reservoir the

P1157

P1156

P0639

“START/PAUSE”

button has to be depressed

again to allow the programme to continue.

Handy tip: The condensed water may be used in a
steam iron or to top up a battery, etc. In this case it
must be filtered (e.g. through a coffee filter).

C

Clle

ea

an

niin

ng

g t

th

he

e a

aiir

r iin

nt

ta

ak

ke

e

g

gr

riilllle

e

Using a vacuum cleaner remove the fluff from the air
intake grille at the back of the appliance.

C

Clle

ea

an

niin

ng

g t

th

he

e d

dr

ru

um

m

When your laundry does not reach the desired degree
of dryness, in other words, when it turns out either
too dry or too damp, we advise you to clean the
inside of the drum with a cloth soaked with vinegar.

This will eliminate the slight patina that has formed
in the drum (due to residues of detergent and
softeners used in the washing, and to the lime
contained in the water), which prevents the probes
from detecting the correct degree of dryness.

P1162

916096121.qxp 2006-06-02 13:28 Page 11

Advertising