Yamaha RX-495RDS - Manual (Page 9)

9
English
1
Multi-information display
Displays various information, for example station frequency,
preset station number and name of selected program source.
2
AUTO (AUTO TUNING) indicator
This indicator lights up when this unit is in the automatic tuning
mode.
3
STEREO indicator
Lights up when an FM stereo broadcast with sufficient signal
strength is received.
4
Signal-level meter
Indicates the signal level of the received station.
If multipath interfernce is detected, the indication decreases.
5
MEMO (MEMORY) indicator
When the MEMORY button is pressed, this indicator flashes for
about 5 seconds. During this period, the displayed station can
be programmed to the memory by using the A/B/C/D/E button
and one of the PRESET STATIONS buttons.
6
RDS mode indicators
RX-495RDS and RX-395RDS only
The name(s) of RDS mode(s) employed by the currently
received RDS station light(s) up. Illumination of the indicator on
the head of a name shows that the corresponding RDS mode
is now selected.
7
PTY HOLD indicator
RX-495RDS and RX-395RDS only
Lights up while the search is performed in the PTY SEEK
mode.
8
EON indicator
RX-495RDS and RX-395RDS only
Lights up when an RDS station that employs the EON data
service is received.
9
Program type name indicators
RX-495RDS and RX-395RDS only
The name selected in the EON mode lights up.
0
SLEEP indicator
Lights up while the built-in SLEEP timer is functioning.
A
TAPE MON (TAPE MONITOR) indicator
RX-395, RX-395RDS
Lights up when the tape deck is selected as the input source
by pressing the TAPE MONITOR button.
RX-495RDS
When the first tape deck is selected as the input source by
pressing the TAPE 1 button, “TAPE MON 1” lights up, and
when the second tape deck is selected by pressing the TAPE 2
button, “TAPE MON 2” lights up.