Set menu – Yamaha RX-SL80 User Manual

Page 40

Advertising
background image

SET MENU

36

You can use the following parameters in SET MENU to adjust a variety of system settings and customize the way this
unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening
environment.

BASIC SETUP

Use to quickly setup basic system parameters (see page 16).

MANUAL SETUP

Use to manually adjust speaker and system parameters.

1 SOUND MENU

Use to manually adjust any speaker setting, alter the quality and tone of the sound output by the system or compensate for
video signal processing delays when using LCD monitors or projectors.

y

Most of the parameters described in SOUND MENU are set automatically when you perform “BASIC SETUP” (see page 16). You can
use SOUND MENU to make further adjustmen

ts.

2 INPUT MENU

Use to reassign digital input and select the input mode.

3 OPTION MENU

Use to adjust the optional system parameters.

*a

: D)TUNER SET is only available for Asia and General models.

*b

: D)SCART SET is only available for U.K. and Europe models.

SET MENU

Item

Features

Page

A)SPEAKER SET

Selects the size of each speaker, the speakers for low-frequency signal output, and the cross over
frequency.

38

B)SP LEVEL

Adjusts the output level of each speaker.

39

C)SP DISTANCE

Adjusts the delay time of each speaker.

40

D)CENTER GEQ

Adjusts the tonal quality of the center speaker.

40

E)LFE LEVEL

Adjusts the output level of the LFE channel for Dolby Digital or DTS signals.

40

F)D. RANGE

Adjusts the dynamic range for Dolby Digital or DTS signals.

41

G)AUDIO SET

Customizes the muting level and audio delay.

41

Item

Features

Page

A)INPUT ASSIGN

Assigns jacks according to the component to be used.

41

B)INPUT MODE

Selects the initial input mode of the source.

42

Item

Features

Page

A)DISPLAY SET

Adjusts the brightness of the display and converts video signals.

42

B)MEMORY GUARD

Locks sound field program parameters and other SET MENU settings.

43

C)PARAM. INI

Initializes the parameters of a group of sound field programs.

43

D)TUNER SET

Switches frequency spacing.

*a

43

D)SCART SET

Turns on this unit when a component connected using a SCART cable is turned on.

*b

43

Advertising