Pitch control, Tuning up, Tuning down ● to restore standard pitch – Yamaha CLP-123 User Manual
Page 13
13
●
Tuning Up
Z
To tune up (raise pitch), hold the A-1 and B-1 keys simultaneously.
X
Press any key between C3 and B3. Each time a key in this range is
pressed the pitch is increased by approximately 1.2 cents, up to a maxi-
mum of 50 cents above standard pitch.
C
Release the A-1 and B-1 keys.
Z
To tune down (lower pitch), hold the A-1 and A#-1 keys simultane-
ously.
X
Press any key between C3 and B3. Each time a key in this range is
pressed the pitch is decreased by approximately 1.2 cents, up to a maxi-
mum of 50 cents below standard pitch.
C
Release the A-1 and A#-1 keys.
Z
To restore standard pitch (A3 = 440 Hz), hold the A-1, A#-1 and B-1
keys simultaneously.
X
Press any key between C3 and B3.
C
Release the A-1, A#-1 and B-1 keys.
* Standard pitch (A3 = 440 Hz) is set when the [POWER] switch is ini-
tially turned ON.
Note: The PITCH CONTROL function has no effect when LOCAL OFF is active
(see “MIDI FUNCTIONS,” page 16).
●
Tuning Down
●
To Restore Standard Pitch*
Pitch control makes it possible to tune the Clavinova over a
±
50-cent range in approximately
1.2-cent intervals. A hundred “cents” equals one semitone, so the tuning range provided allows
fine tuning of overall pitch over a range of approximately a semitone. Pitch control is useful for
tuning the Clavinova to match other instruments or recorded music.
Pitch Control
C
3
B
3
A
-1
B
-1
A
-1
A
#
-1
C
3
B
3
A
-1
B
-1
A
#
-1
C
3
B
3