SINBO SJ 3129 - Manual (Page 16)

- 15 -
ATTENTIONS
professional persons. In case of fault, do not disassemble the machine by
yourself, please contact our maintenance department or our after service
department.
Maintenance and cleaning
1.This machine shall be often used, so as to keep the motor dry and clean.
2.If not using for a long time, please store this machine at a dry and well-
ventilated place so as to prevent the motor from being damped and going
moldy.
3.No washing the main machine. When cleaning, only wipe with wet cloth.
Other components may be washed directly with water, such as pushing bar,
cover, middle seat, residue cup, juice nozzle cover.
4.Every month, remove the cutter rest of mixing cup, mincing cup and grinding
cup, drop a little edible oil into the cutter shaft and bearing in order to ensure
lubrication.
5.For cleaning the mixing cup, fill some warm water and ware detergent,
mount on the main machine, put the cover on, press the switch to mix for 30s,
then wash clean with water.
ENVIRONMENTAL DISPOSING
You can help protect the environment!
Please remember to respect the local regulations, hand in the
non-working electrical equipments to an appropriate waste
disposal center.