Zebra Technologies Zebra P120i - Manual (Page 60)

50 P120i Card Printer User Guide 980504-001 Rev. A
Cleaning
Cleaning System
5. If the lid is opened and closed without removing the ribbon, the
REMOVE RIBBON THEN
CLOSE LID message will remain.
6. Once the cover is closed, the firmware will eject any card inside the printer. The message
EJECTING CARD
will display .
7. The LCD will then display
FEED LONG CLEANING CARD IN EXIT.
When the card sensor
registers the presence of the cleaning card, the rollers should take the card into the printer.
8. When the cleaning process is done, the printer will eject the cleaning card. If the card
sensor still senses the cleaning card, the message
REMOVE LONG CLEANING CARD
will
display .
9. Once the long cleaning card is no longer sensed by the exit card sensor, the message
INSERT FEEDER CLEANING CARD will display . Open the feeder cover and insert the
feeder cleaning card.
10. When the feeder cleaning card has been sensed by the feeder card sensor, the message
CLOSE FEEDER COVER will display .
11. When feeder cleaning is complete, the message
REMOVE FEEDER CLEANING CARD
will
display .
12. After the card is removed, the LCD will display READY. You may now reload the ribbon
and cards and continue printing.
FEEDER
CLEANING
CARD
PRINTER PATH
CLEANING CARD
CARD
FEEDER
COVER
MULTI-FUNCTION
LCD PANEL
MULTI-FUNCTION
CONTROL BUTTON