Yamaha CC-70S - Manual (Page 25)

23
TUNING OPERATION
Preset tuning
This unit can store station frequencies selected by tuning
operation. With this function, you can select any desired
station by only calling the corresponding preset station
number. Up to 40 stations (8 stations x 5 areas) can be
stored.
To store stations
(Example: To store a station to A1)
1
Tune to a desired station.
(Refer to the previous page for tuning procedure.)
2
Press the MEMORY button.
* The MEMORY indicator will flash for about 5 seconds.
3
Select a desired area (A – E) by pressing the A/B/C/D/E
button while watching the display, before the MEMORY
indicator goes out.
(In this case, select area A)
4
Select a preset station number by pressing the TUNER
PRESET DOWN or UP button repeatedly before the
MEMORY indicator goes out.
(In this case, select “1”.)
5
Within about 5 seconds, press the MEMORY button
again.
* In the same way, program other stations to A2, A3 ... A8.
* You can program more stations to the preset station
numbers on other areas in the same way by selecting other
areas in step 2.
To recall a preset station
1 1
Select the area of preset station numbers by pressing the
A/B/C/D/E button.
2 2
Select the desired preset station number by pressing the
TUNER PRESET DOWN or UP button repeatedly.
Notes
• A new setting can be programmed in place of the former
one.
• For presets the setting of the AUTO/MAN’L button is
stored along with the station frequency.
For easier operation
By using the preset station number buttons and the
A,B,C,D,E selector buttons on the remote control transmitter,
a preset station number and an area can be selected directly.
Shows the displayed station
has been programmed to A1.
Receiver
- +
1 2 3 4 5
1 2 3 4 5
6 7 8
6 7 8 9 0
A B C D E
TIME PROG TAPE EDIT + I0
SEARCH
SKIP
STOP PLAY/PAUSE
DISC SKIP RANDOM REPEAT
CD
TUNER
TAPE
PRESET A/B/C/D/E
DOWN UP
PLAY STOP PLAY
REC/PAUSE
SLEEP POWER DISPLAY VOLUME
DECK PHONO/AUX
TUNER DIRECT
A/B
4, 2 2
3, 1 1 2, 5
4, 2 2
3, 1 1
4, 2 2
3, 1 1
STEREO AUTO TUNING
PRESET
MHz