Cd synchronized recording – Yamaha CDC-775 User Manual
Page 20
20
4
If desired, select the track to be recorded first.
5
Both CD play and tape deck recording begin.
* CD play begins a little later than recording.
6
If you want to stop recording temporarily and restart
recording from a desired track, follow steps 3–5 again.
To cancel this function
Press the STOP button.
Notes
●
To finish or stop recording, press the “STOP” button on the
tape deck.
●
Programmed sequence of tracks can also be recorded with
this function, instead of recording an entire disc. (Refer to
pages 14–15 for the programming procedure.)
●
This function can also be used together with the automatic
tape-programming function. (Refer to pages 21–23.)
1
Select a disc.
2
Load a tape on the tape deck.
* The peak level searching function of this unit is
useful for adjusting recording level on the tape deck.
(Refer to page 24.)
3
This unit enters into the pause mode, and the tape deck
enters into the REC/PAUSE mode.
* In this mode, the time display on this unit blinks.
CD SYNCHRONIZED RECORDING
Using a compatible YAMAHA tape deck, you can synchronize the tape deck to start recording automatically when a CD starts
playing. With this function, you can record a CD on tape more easily and precisely. (Refer to the tape deck’s operation manual to
know whether it is compatible or not.)
* This unit and the tape deck must be placed close to each other so that both of them can receive the signals from this unit’s
remote control transmitter at the same time.
1
2
3
4
5
6
7
8
9
0
+10
INDEX
REPEAT
RANDOM
TAPE
CLEAR
SYNCHRO
PROG
DIMMER
TIME
OPEN/
CLOSE
FILE MODE
FILE EDIT
TEXT SRCH
TEXT MODE
CAPS
ENTER
DISC MODE
DISC SCAN
OUTPUT LEVEL
SKIP/SEARCH
STOP
PAUSE
PLAY
DISC SKIP/
CHARACTER
1
4
5
4
3
PEAK
DISC SKIP/
CHARACTER
SYNCHRO
6
SKIP/SEARCH
PLAY
or