Random sequential tape programming, English, Display information during programming – Yamaha CDC-775 User Manual

Page 23

Advertising
background image

23

English

Notes

Because the programmed data changes every time the

RANDOM button is pressed, the amount of time remaining
at the end of the tape also changes accordingly.

It is recommended that you use a tape that is slightly longer

in length than the CD you are recording, because the
programmed tracks on a CD may not fit properly into the
time allowed on each half of the tape.

CD synchronized recording function can be used if your tape

deck is compatible with it.

In this case, in steps 3 and 4, press the SYNCHRO button

and then press the PLAY button on this unit’s remote control
transmitter. Recording automatically begins.

(For details, refer to page 20.)

Display information during programming

Shows the number of programmed tracks for each side in
turn just after the automatic programming is finished, and
then it is replaced by the number of the first programmed
track for side A.

Shows the total time of programmed tracks for each side.

Shows the programmed track numbers for each side.

Random sequential tape programming

The unit will automatically program tracks on a disc in random
sequential order for recording to tape.

1

Follow steps 1 – 4 on page 21.

2

The unit will automatically program tracks for side A and
side B separately considering the tape’s total time.
* The programmed track numbers and the total

number of tracks for side A and B are displayed for a
short time.

3

Start recording on the tape deck and press the PLAY
button on this unit’s remote control transmitter at the
same time.

4

The unit will pause at the end of side A of the tape.
Turn the tape over to side B. Resume recording and,
at the same time, press the PLAY or PAUSE button on
this unit’s remote control transmitter.

Display information during programming

PROG

1 2 3 4 5
6 7 8 9 10

PROG

1 2 3 4 5
6 7 8 9 10

RANDOM

1

2

3

4

5

6

7

8

9

0

+10

INDEX

REPEAT

RANDOM

TAPE

CLEAR

SYNCHRO

PROG

DIMMER

TIME

OPEN/

CLOSE

FILE MODE

FILE EDIT

TEXT SRCH

TEXT MODE

CAPS

ENTER

DISC MODE

DISC SCAN

OUTPUT LEVEL

SKIP/SEARCH

STOP

PAUSE

PLAY

DISC SKIP/

CHARACTER

3, 4

4

2

PEAK

PROG

1

3

5

7

Shows the side of the tape and the program number for the
track to be programmed next.

Shows the selected disc and track number.

Shows the total remaining time on the side of the tape.

Programmed track numbers light up and programmable
track numbers among the unprogrammed ones blink.

* If “A-1” does not appear in the display after the PROG

button is pressed, press the TIME display mode-select
button.

* If, during programming, the TIME display mode-select button

is pressed, the program number display can be changed to
display the total remaining time on the side of the tape. To
return to the previous display, press the TIME display mode-
select button once again.

Advertising