Zanussi ZOB 150 - Manual (Page 8)

8
Before using the oven for the first time
To open the oven door, always hold the
handle in the centre.
Remove all packaging, both inside and
outside the oven, before using the oven.
Before using for the first time, the oven should be
heated up without food.
During this time, an unpleasant odour may be
emitted. This is absolutely normal. It is caused by
manufacturing residues.
Ensure the room is well ventilated.
1. Switch the oven function control knob
to conventional cooking .
2. Set the thermostat control knob to
250°C.
3. Open a window for ventilation.
4. Allow the oven to run empty for ap-
proximately 45 minutes.
This procedure should be repeated with the full
grill function for approximately 5-10 minutes.
)
Safety Thermostat
To prevent dangerous overheating (through
incorrect use of the appliance or defective
components), the oven is fitted with a safety
thermostat, which interrupts the power supply. The
oven switches back on again automatically, when
the temperature drops.
Should the safety thermostat trigger due to incorrect
use of the appliance, it is enough to remedy the error
after the oven has cooled down; if on the other hand,
the thermostat triggers because of a defective
component, please contact Customer Service.
Then let the oven cool down. Then
dampen a soft cloth with warm water and
a little mild washing-up liquid and use this
to clean the oven cavity.
Before using for the first time, carefully
wash the oven accessories as well.
The Cooling Fan
The oven is provided with a cooling fan, meant to
keep the front panel, the knobs and the oven door
handle cool.The fan switches on automatically
when the oven is activated. Warm air is blown out
through the aperture near the oven door handle.
The fan switches off when, after cooking, the oven
function control knob is set to OFF position
0
.