Appendix, Digital effect type list – Yamaha WA66540 User Manual
Page 24
Appendix
MG32/14FX, MG24/14FX
24
■ Digital effect type list
• Common to EFFECT 1 and 2
• EFFECT 1
• EFFECT 2
* The LED can not blink any faster than an interval of 256 ms (234.3 bpm).
No.
Type
Description
Controllable parameter
Parameter
Variable range
1
REVERB HALL
Reverberation simulating a spacious expanse such as a concert hall. Reverb time
0.3–10.0 s
2
REVERB ROOM
Reverberation simulating the acoustics of a small room.
Reverb time
0.3–3.2 s
3
REVERB PLATE
Simulation of a plate reverb device. Produces a hard-sounding rever-
beration.
Reverb time
0.3–10.0 s
4
REVERB VOCAL 1
Ideal reverb for vocals.
Reverb time
0.3–10.0 s
5
REVERB VOCAL 2
6
VOCAL ECHO 1
Ideal echo for vocals.
Delay time
0–800 ms
7
VOCAL ECHO 2
8
DELAY 1
Delay effect that delays the signal.
Delay time
0–800 ms
9
DELAY 2
0
MOD. DELAY
Monaural delay with modulation.
Delay time
0–800 ms
A
REVERB GATE
An effect that simulates reversed early reflections.
Room size
0.1–10.0
B
PITCH CHANGE
An effect that changes the pitch of the input signal.
Pitch
–12–+12
C
CHORUS
Modulates the delay time of the signal to add depth to the sound.
Depth
0–100%
D
PHASER
An effect that changes the phase of the sound to create modulation.
Modulation frequency 0.05–4.00 Hz
E
RADIO VOICE
An effect that produces a lo-fi sound like that of an AM radio.
Drive
0–100
F
TREMOLO
An effect that adds modulation to the sound.
Modulation frequency 0.05–10.00 Hz
0
EARLY REF.
An effect produced by modifying the early reflections. It lets you add
depth to the sound, or create echo-like effects.
Room size
0.1–10.0
A
GATE REVERB
An effect produced by cutting the reverberation.
Room size
0.1–5.0
B
VOCAL DOUBLER
Produces an effect as though two people were singing.
Pitch fine
0–50
C
SYMPHONIC
Gives a richly layered depth to the sound.
Depth
0–100%
D
FLANGE
Adds a sense of pitch to the tone. Effective on sounds that contain
numerous overtones.
Modulation frequency 0.05–4.00 Hz
E
DISTORTION
The well-known effect used to distort the sound.
Drive
0–100
F
TAP DELAY
This effect sets the delay time to the interval at which you actually
press the switch. The amount of feedback can be adjusted by the
PARAMETER control. The LED will blink in synchronization with the
delay time.
Feedback gain
0–99%
Delay time
100 ms (600 bpm)
–2690 ms
(22.3 bpm)*