Zoom G2.1NU - Manual (Page 18)

18 ZOOM G2Nu/G2.1Nu
Creating and Changing Patches (Edit Mode)
1. Select a patch to edit (→P9)
2. Select a module to edit
Turn the module selector to the module you want to edit.
This activates edit mode.
Parameter 1 of the
current effect type
Parameter 2 of the
current effect type
Parameter 3 of the
current effect type
HINT
• The EQ module is a single module, but it is separated into "EQ Lo" and "EQ Hi" screens for
editing.
• The TOTAL module is a special module that you can use to set the overall patch volume (patch
level) and to edit the patch name, for example.
The selected module is shown larger.
The edit screen opens automatically.
Effect type
HINT The edit screen does not open if the selected module is OFF.
Parameter