Zanussi ZCE 610 X - Manual (Page 10)

10
2. THE TIMER
IMPORTANT
The timer can be used to time a set cooking period.
At the end of the cook time the timer will
automatically switch off the oven if in use.
The timer gives an audible reminder at the end of any
period of cooking up to 23 hours and 59 minutes.
To set, press button (1) and the display will read
0 . 00 , see Fig. 6.
Release button (1) and press and hold button (2). The
display will count up in one minute intervals until the
interval to be timed is reached, e.g. 30 minutes, see
Fig. 7. If necessary, press and hold button (1) to
achieve the correct time interval.
The timer will begin to count down once set. At the
end of the timed period, the timer will click,
switching the oven OFF if in use.
An audible signal will sound for up to 2 minutes.
The cookpot symbol will flash and the time of day
will show in the display. See Fig. 8.
To stop the sound press button (1). The display will
stop flashing and show the time of day, e.g. 15.00.
The cookpot symbol (
) will go out. See Fig. 9. If
using the oven it will come on again once button (1)
has been depressed. When cooking is complete
remove food and turn OFF oven temperature control.
3. TO CANCEL THE TIMER
Press and release button (1). Then press and hold
button (1) and the display will count down in one
minute intervals to
0 . 00 . See Fig. 10. Release
button (1).
After a few seconds the cookpot symbol will flash and
the time of day will show in the display. See Fig. 11
If the oven is in use this will switch OFF after a few
seconds.
To reset, press button (1) and (2) together. See Fig. 12.
4. THINGS TO NOTE
1. The time of day must be set before the oven will
operate. There will be a few seconds delay before
the oven switches on.
2. The timer function controls the main oven only
and will switch the oven OFF at the end of a timed
period. This function is useful if you want to begin
cooking now and have the oven switch OFF
automatically.
3. If you have used the timer to time food cooking in
the oven you will need to reset the timer before
the oven can operate again.
Fig. 8
Fig. 7
Fig. 9
Fig. 6
STOP
SET
TIME
PUSH
BOTH
- +
STOP
SET
TIME
PUSH
BOTH
- +
STOP
SET
TIME
PUSH
BOTH
- +
STOP
SET
TIME
PUSH
BOTH
- +
STOP
SET
TIME
PUSH
BOTH
- +
STOP
SET
TIME
PUSH
BOTH
- +
STOP
SET
TIME
PUSH
BOTH
- +
Fig. 12
Fig. 11
Fig. 10