Zanussi ZCE 610 X - Manual (Page 4)

4
STOP SET TIME
Description of the Cooker
Splash back
(only on model ZCE
610 X)
Back left normal
hotplate
Front left rapid
hotplate
Control panel
Shelf
Oven door
Front right rapid
hotplate
Back right normal
hotplate
Fitting the Splash back
(only on model ZCE 610 X)
A stainless steel splash back is supplied with the
appliance. This is meant to be fitted on the rear edge
of the cooker's hob. The splash back package is in the
oven cavity.
1. Unpack the splash back and dispose of the
packaging with due regard to safety and the
environment.
2. Slide the two bayonets of the splash back into the
relevant supports on the rear edge of the cooker's
hob.