Adjusting the delay time and speaker output levels – Yamaha HTR-5140RDS User Manual
Page 45
45
English
2
Press + or – to adjust the settings for the delay time or
speaker output levels.
Front panel
Remote control
or
3
Repeat steps 1 to 2 to adjust the settings of any other
item.
ADJUSTING THE DELAY TIME AND SPEAKER OUTPUT LEVELS
When using the digital sound field processor with the Dolby Pro Logic Surround decoder or the Dolby Digital decoder, you can
adjust the delay time between the main sound and sound effect, and each speaker’s output level as you prefer.
Adjusting method
When adjusting with the remote control transmitter, press
AMP<TUNER> on the component selector.
1
Press TIME/LEVEL once or more until the name of the
item which you want to adjust appears on the display.
Front panel
Remote control
or
When pressed, the selection changes as follows:
D E L A Y
C E N T E R
R S U R .
L S U R .
S W F R
* Depending on the setting in the SET MENU mode, you
may not be able to select all items.
Delay time
Center speaker output level
Right rear speaker output level
Left rear speaker output level
Subwoofer output level
1
2
2
1
01RX-V495RDS-4
6/22/99, 12:29 PM
45