ZyXEL Communications P-2304R-P1 Series - Manual (Page 191)

Chapter 18 System
P-2304R-P1 Series User’s Guide
191
Figure 107 Maintenance > System > Dynamic DNS
Each field is described in the following table.
Table 84 Maintenance > System > Dynamic DNS
LABEL DESCRIPTION
Dynamic DNS
Setup
Enable Dynamic
DNS
Select this to use dynamic DNS.
Service Provider Select the name of your Dynamic DNS service provider.
Dynamic DNS
Type
Select the type of service that you are registered for from your Dynamic DNS
service provider.
Host Name Enter the host name. You can specify up to two host names, separated by a
comma (",").
User Name Enter your user name.
Password Enter the password assigned to you.
Enable Wildcard
Option
Select this to enable the DynDNS Wildcard feature.
Enable offline
option
This field is available when CustomDNS is selected in the DDNS Type field.
Select this if your Dynamic DNS service provider redirects traffic to a URL that you
can specify while you are off line. Check with your Dynamic DNS service provider.
IP Address
Update Policy
Use WAN IP
Address
Select this if you want the ZyXEL Device to update the domain name with the
WAN port's IP address.