Zebra Technologies RP - Manual (Page 20)

UMAN-Charge 20
Trickle Chargers
Description
These compact, cost effective chargers are designed to
charge individual battery packs. Typical charge time is 12 to
16 hours.
Charging Batteries
Plug the charge cable into the battery pack charger jack,
and the Charger body into the appropriate A.C. wall recep-
tacle. Trickle Chargers will charge the battery overnight,
typically in 12 to 16 hours. While they can be used when the
printer is running, charging time will be lengthened.
Trickle Charger Models
Part No V.A.C./Hz (Country) Batt. Voltage/Model
AT852 110/60 (U.S.) 7.2 V/ MP503x Series
AT855 110/60 (U.S.) 6.0 V/ MP502x Series
AT856 110/60 (U.S.) 12 V/ MP5044
AT12478-1 220/50 (Euro) 6/7.2V/MP502x/3x Series
AT12479-1 220/50 (Euro) 6/7.2V/Encore, Cameo
Series
AT12699-1 220/50 (U.K.) 6-7.2V/MP Series
AT12700-1 220/50 (U.K.) 12V/MP5044
AT13797-1 110/60 (U.S.) 7.2V/Encore, Cameo
Trickle Chargers do not condition batteries, and
thus should not be used as the principal
charger for NiCad battery packs such as
used on the MP and RP
series.
Charger Jack
A.C. Receptacle
Charger Body