Listening to the radio, E-13, Playing cds getting started tuner operations – Yamaha CRX-M5 User Manual
Page 19: English automatic tuning 1, Manual tuning 1, One touch play, Using the / / ? buttons on the front panel, Press fm/am to select the reception band, Press tuning, For a higher frequency) or
Playing CDs
Getting Started
TUNER OPERATIONS
E-13
English
Automatic tuning
1
Press INPUT so that the frequency of the radio
station appears in the display.
2
Press FM/AM to select the reception band.
3
Press and hold TUNING
/
(for a higher frequency)
or
?
(for a lower frequency) for more than 2
seconds, then release the button.
Listening to the radio
4
The unit starts searching for a station.
When the unit finds a station, the unit stops
searching and “TUNED” appears in the display.
5
If the located station is not the desired one, repeat
steps 3 and 4 until your desired station is heard.
Notes
• If automatic tuning search does not find the desired station,
try manual tuning as described below.
• When an FM stereo broadcast with sufficient signal strength
is received, “STEREO” appears in the display and you can
listen to stereo sound.
Manual tuning
1
Follow steps 1 and 2 described in “Automatic
tuning.”
2
Press TUNING
/
(for a higher frequency) or
?
(for
a lower frequency) to select your desired station.
• Each time you press TUNING
/
or
?
, the
frequency changes step by step.
Note
• If an FM program is noisy, press ST/MONO so that
”STEREO” disappears from the display. There will be no
stereo effect, but the reception will improve. Press this
button again to restore the stereo effect.
One touch play
You can switch from another source to the radio just by
pressing FM/AM. In this case, the unit tunes to the last
received station.
Using the //? buttons on the front
panel
The
/
/
?
buttons on the front panel work as the
TUNING
/
/
?
buttons or PRESET
/
/
?
buttons. To
change a part, press TUNING/PRESET on the front
panel. Each time you press TUNING/PRESET, the item
changes.
You can find radio stations automatically, if station
signals are strong and there is no interference.
However, if signals of the desired station signal is
weak, you must tune to it manually.
TUNING
/
/?
FM/AM
INPUT
Selected band
Station frequency
STEREO
CH
MHz
POWER
TIMER
SET
TUNING
FM/AM
ST/MONO
DISC
MEMORY
TUNER CD
INPUT
SLEEP
MUTE
VOLUME
CLOCK
TAPE
MD
CT
PTY
RT
RDS
/
2
3
1
1
2
3
4
5
6
7
8
9
0
TIME
REP
EDIT
PGM
PRESET
/
REC/
PAUSE
REC/
MUTE
CD
SYNC
+10
/
–
+
TUNED
STEREO
CH
MHz