Yamaha DSP-A990 - Manual (Page 40)

The remote control unit, in addition to controlling the most
commonly used functions of the main unit and other connected
Yamaha audio and video equipment, has a sophisticated “learning”
function that allows it to control other equipment in your system or
other household appliances equipped with infrared remote control
receivers. By setting the YPC/USER/LEARN switch on the remote
control unit to “LEARN”, all keys will turn into “learnable function
keys”, each capable of “learning” a different remote control
function. Also, each key can learn two different functions by
switching the learning group (1 or 2) with the 1/2 switch. However,
as for the keys shaded in the following figure, the
PARAMETER/SET MENU switch will select the learning group
number (1 or 2) instead of the 1/2 switch.
Learning a New Remote Control Function
1. Select the learning group number (1 or 2) by using the 1/2
switch.
2. Set the YPC/USER/LEARN switch to “LEARN”.
3. Aim the infrared transmitter window of the other remote control
unit.
4. Press the key that is to have a new function assigned to it. The
TRANSMIT/LEARN indicator will light up.
5. Press and hold down the button on the other remote control
unit corresponding to the new function to be learned. Hold the
button down until the TRANSMIT/LEARN indicator is extinguished.
The function has now been learned.
6. Repeat steps 4 and 5 to learn additional functions.
7. Set the YPC/USER/LEARN switch to “USER”. Pressing the
learned key will now perform the assigned function. Provided user
program sheets should be used to record the functions learned by
the various keys.
ON SCREEN
CENTER
LEVEL PARAMETER
EFFECT
RESET CLEAR
ON/OFF
REAR
LEVEL MUTING
SET MENU
VIDEO THEATER THEATER PRO LOGIC
MASTER VOLUME
9 10 11 12
38
2-8. REMOTE CONTROL “LEARNING” FUNCTION
PARAMETER/SET MENU
switch
5–10 cm