Safety precautions usage precautions, Safety precautions, Usage precautions – Zoom B22 User Manual

Page 2: Zoom b2

Advertising
background image

ZOOM B2

2

SAFETY PRECAUTIONS

In this manual, symbols are used to highlight warnings and
cautions for you to read so that accidents can be prevented. The
meanings of these symbols are as follows:

This symbol indicates explanations about extremely
dangerous matters. If users ignore this symbol and
handle the device the wrong way, serious injury or
death could result.

This symbol indicates explanations about dangerous
matters. If users ignore this symbol and handle the
device the wrong way, bodily injury and damage to
the equipment could result.

Please observe the following safety tips and precautions to
ensure hazard-free use of the B2.

Power requirements

Since power consumption of this unit is fairly high, we
recommend the use of an AC adapter whenever
possible. When powering the unit from batteries, use
only alkaline types.

[AC adapter operation]

• Be sure to use only an AC adapter which supplies 9 V DC,

300 mA and is equipped with a "center minus" plug
(Zoom AD-0006). The use of an adapter other than the
specified type may damage the unit and pose a safety
hazard.

• Connect the AC adapter only to an AC outlet that supplies

the rated voltage required by the adapter.

• When disconnecting the AC adapter from the AC outlet,

always grasp the adapter itself and do not pull at the cable.

• During lightning or when not using the unit for an

extended period, disconnect the AC adapter from the AC
outlet.

[Battery operation]

• Use four conventional IEC R6 (size AA) batteries

(alkaline).

• The B2 cannot be used for recharging.
• Pay close attention to the labelling of the battery to make

sure you choose the correct type.

• When not using the unit for an extended period, remove

the batteries from the unit.

• If battery leakage has occurred, wipe the battery

compartment and the battery terminals carefully to
remove all remnants of battery fluid.

• While using the unit, the battery compartment cover

should be closed.

Environment

To prevent the risk of fire, electric shock or
malfunction, avoid using your B2 in environments
where it will be exposed to:

• Extreme temperatures
• Heat sources such as radiators or stoves

• High humidity or moisture
• Excessive dust or sand
• Excessive vibration or shock

Handling

• Never place objects filled with liquids, such as vases, on

the B2 since this can cause electric shock.

• Do not place naked flame sources, such as lighted candles,

on the B2 since this can cause fire.

• The B2 is a precision instrument. Do not exert undue

pressure on the keys and other controls. Also take care not
to drop the unit, and do not subject it to shock or excessive
pressure.

• Take care that no foreign objects (coins or pins etc.) or

liquids can enter the unit.

Connecting cables and input and output
jacks

You should always turn off the power to the B2 and all
other equipment before connecting or disconnecting
any cables. Also make sure to disconnect all connection
cables and the power cord before moving the B2.

Alterations

Never open the case of the B2 or attempt to modify the
product in any way since this can result in damage to
the unit.

Volume

Do not use the B2 at a loud volume for a long time
since this can cause hearing impairment.

Usage Precautions

Electrical interference

For safety considerations, the B2 has been designed to provide
maximum protection against the emission of electromagnetic
radiation from inside the device, and protection from external
interference. However, equipment that is very susceptible to
interference or that emits powerful electromagnetic waves
should not be placed near the B2, as the possibility of
interference cannot be ruled out entirely.

With any type of digital control device, the B2 included,
electromagnetic interference can cause malfunctioning and can
corrupt or destroy data. Care should be taken to minimize the
risk of damage.

Cleaning

Use a soft, dry cloth to clean the B2. If necessary, slightly
moisten the cloth. Do not use abrasive cleanser, wax, or solvents
(such as paint thinner or cleaning alcohol), since these may dull
the finish or damage the surface.

Please keep this manual in a convenient place for
future reference.

Warning

Caution

Warning

Warning

Warning

Caution

Warning

Caution

SAFETY PRECAUTIONS Usage Precautions

EB2.fm 2 ページ 2005年7月27日 水曜日 午後4時15分

Advertising