Zoom b2, Control – Zoom B22 User Manual

Page 30

Advertising
background image

Effect Types and Parameters

ZOOM B2

30

"UP"

Maximum value

Minimum value

Maximum value

Maximum value

Value set in patch

Value set in patch

Minimum value

Minimum value

"DOWN"

"HIGH"

"LOW"

RTM (Real Time Modulation):

The effect parameter can be changed with the expression pedal in real time.

CONTROL

CONTROL module

Serves for making pedal settings and lets you control the foot switch function and master
level setting applying to all patches.

RTM DESTINATION

See Table 6

FS

See Table 7

MASTER LEVEL

0 – 98, 1.0

When an expression pedal (FP01/FP02)
is connected to the [CONTROL IN]
jack, this selects the modulation target
module for the RTM function (See Table
6).

When a foot switch (FS01) is connected
to the [CONTROL IN] jack, this selects
the function that can be operated with
the foot switch (See Table 7). The
function selected here applies to all
patches.

Adjusts the master level for all patches.

Table 6

Table 7

Setting

Modulation target

Setting

Function

oF

OFF

bP

Bypass/Mute

VL

Volume

tP

Tap tempo

WU, Wd, WH, WL

WAH/EFX module (*)

bU

Bank up

bU, bd, bH, bL

ZNR/MIX module (*)

rH

Rhythm function on/off

MU, Md, MH, ML

MOD/SFX module (*)

dH

Delay hold

dU, dd, dH, dL

DELAY module (*)

dM

Delay mute

rU, rd, rH, rL

REVERB module (*)

The operation of modules denoted by (*) changes as
follows, according to the letter at right.

UP

The parameter is at minimum when the pedal is fully raised and
at maximum when the pedal is fully pushed down.

DOWN

The parameter is at maximum when the pedal is fully raised and
at minimum when the pedal is fully pushed down.

HIGH

When the pedal is fully raised, the parameter is at the value set in
the patch. When the pedal is fully pushed down, the parameter is
at maximum.

LOW

When the pedal is fully raised, the parameter is at minimum.
When the pedal is fully pushed down, the parameter is at the
value set in the patch.

HINT

When the ZNR/MIX module is selected as modulation target, the pedal
adjusts the mixing balance of the DRIVE/SYNTH module (

p. 26).

U

D

H

L

EB2.fm 30 ページ 2005年7月27日 水曜日 午後4時15分

Advertising