ZyXEL Communications Prestige 310 - Manual (Page 135)

Prestige 310 Broadband Sharing Gateway
Call Scheduling 12-3
Table 12-1 Schedule Set Setup Fields
Field Description Option
Active Press the [Space Bar] to toggle between Yes and No. Choose Yes
and press [Enter] to activate the set. Yes
No
Start Date Enter the start date that you wish the set to take effect in year-month-
date format. Valid dates are from January 1, 1990 to February 5,
2036.
How Often Should this schedule set recur weekly or be used just once only?
Press the [Space Bar] to toggle between Once and Weekly. Both
these options are mutually exclusive. If Once is selected, then all
weekday settings are N/A. When Once is selected, the schedule rule
deletes automatically after the scheduled time elapses. Once
Weekly
Once: Date If you selected Once in the How Often field above, then enter the date
the set should activate here in year-month-date format.
Weekday:
Day If you selected Weekly in the How Often field above, then select the
day(s) the set should activate (and recur) by going to that day(s) and
pressing the [Space Bar], then [Enter] to select Yes. Yes
No
N/A
Start Time Enter the start time that you wish the set to take effect in hour : minute
format.
Duration Enter the maximum duration allowed in hour : minute format for this
scheduled connection per call.
Action Press the [Space Bar] to toggle between these options. Choose one
and then press [Enter]. Forced On,
Forced Down,
Enable Dial-On-
Demand, or
Disable Dial-On-
Demand.
12.1.1 Applying A Schedule Set
After you’ve configured your schedule sets, you must apply them to the desired remote node(s). Enter 11
from the Main Menu and then select either PPPoE or PPTP encapsulation. You can apply up to 4 schedule
sets, separated by commas, for one remote node.