ZyXEL Communications Prestige 310 - Manual (Page 49)

Prestige 310 Broadband Sharing Gateway
Internet Access 3-7
Field Description Example
space bar to enable IP Multicasting or select None (default) to
disable it.
Edit IP Alias The Prestige supports three logical LAN interfaces via its single
physical Ethernet interface with the Prestige itself as the gateway for
each LAN network. Press the space bar to toggle No to Yes, then
press [ENTER] to bring you to menu 3.2.1 Yes
No (default)
When you have completed this menu, press [Enter] at the prompt [Press ENTER to Confirm…] to save your
configuration, or press [Esc] at any time to cancel.
3.2.1 IP Alias Setup
You must use Menu 3.2 to configure the first network and move the cursor to the Edit IP Alias field and
press [SPACE BAR] to choose Yes and press [ENTER] to configure the second and third network.
Pressing [Enter] opens Menu 3.2.1 - IP Alias Setup, as shown next.
Figure 3-5 Menu 3.2.1 - IP Alias Setup
Follow the instructions in the following table to configure IP Alias parameters.
Table 3-3 IP Alias Setup Menu Fields
Field Description Example
IP Alias Choose Yes to configure the LAN network for the Prestige. Yes
IP Address Enter the IP address of your Prestige in dotted decimal notation 192.168.2.1
IP Subnet Mask Your Prestige will automatically calculate the subnet mask based on
the IP address that you assign. Unless you are implementing
255.255.255.0
Menu 3.2.1 - IP Alias Setup
IP Alias 1= No
IP Address= N/A
IP Subnet Mask= N/A
RIP Direction= N/A
Version= N/A
Incoming protocol filters= N/A
Outgoing protocol filters= N/A
IP Alias 2= No
IP Address= N/A
IP Subnet Mask= N/A
RIP Direction= N/A
Version= N/A
Incoming protocol filters= N/A
Outgoing protocol filters= N/A
Enter here to CONFIRM or ESC to CANCEL:
Press Space Bar to Toggle.