Zanussi ZWH6121 P - Manual (Page 12)

12
Set your washing program
Attention!
The selector dial is divided into following sections:
The selector dial can be turned either clockwise or
anticlockwise. Position
“O” to Reset program/Switching
OFF the machine.
If you turn the program selector dial to another program
when the machine is working, the
red Start/Pause ( ) pilot
light will flash 3 times to indicate a wrong selection. The
machine will not perform the new selected program.
At the end of the program the selector dial must be
turned to position “O”, to switch the machine off.
(Cottons)
(Cottons Prewash)
(Cottons Economy)
(Synthetics)
(Mixed Fabric)
(Delicates)
(Rinse)
(Drain)
(Spin)
(Easy Iron)
(Blanket)
(Mini 30)
(Jeans)
(Wool/Handwash)
(Cancelling/Off)
Program selector dial Turn the program selector dial to the required program. The
green Start/Pause ( ) light starts to flash.
Temperature Button ( )
Press this button repeatedly to increase or decrease the
temperature, if you want your laundry to be washed at a
temperature different from the one proposed by the
washing machine.
If a temperature is chosen that is not allowed with the
selected program, the
red pilot light of the Start/pause
( ) button will flash 3 times.
* for more programs information see page 16.
Turn the selector dial to “O” to cancel a program which is
running. Now you can select a new program.
Cancelling a program
By selecting position (Cold) the machine will wash with
cold water. To be used for extremely delicate items,
such as curtains.