Yamaha NX-SW70 - Manual (Page 5)

3
English
USING THE SPEAKER MOUNTING BRACKETS
Use the provided type A wall brackets when hanging the rear speakers on a wall.
1
Attach two commercially available wood
screws (diameter about 4 mm) in the location
on the wall where the rear speaker is to be
hung, and then mount the bracket on the wood
screws.
Check that the wood screws are secure inside the
narrow portion of the holes in the bracket.
65 mm
20 mm or more
Type A bracket
2
Attach the speaker to the bracket using the
provided wing nut.
Wing nut (provided)
3
Adjust the angle of the speaker and then
tighten the wing nut.
■ To mount speakers directly to the
wall
It is possible to hang the speakers directly on the wall
without using the type A brackets by attaching two wood
screws to the wall and then using the holes on the rear panel
of the speakers for direct attachment.
Wood screws having a diameter of about 4
to 5 mm (commercially available)
65 mm 65 mm
5 mm
20 mm or more
Note
• After mounting, check that the speakers are attached securely.
■ YAMAHA speaker stand SPS-AV1
(sold separately)
The rear speakers can also be attached to SPS-AV1 speaker
stands and used as floor stand speakers.
0102NX-SW70_01_EN 3/29/0, 10:21 AM 3