Zhone Technologies 800 - Manual (Page 120)

5-14 IMACS System Release 5.1.6 Server Cards
Model No. Running Head IPR Card Configuration Screens and Settings IPR Card
Table 5-4. IPR 10B2 and 10BT Ethernet and Default IP Option Settings and Defaults
STATE
Activates or deactivates Ethernet port. The settings are actv or stdby.
ENCAPSULATION
Ethernet encapsulation. The settings are Ether or 802.
IP INTERFACE
IP Interface name from IP Interface screen. This must be a valid IP interface.
IP MTU
IP MTU on Ethernet. The IP MTU can be between 64-1500.
RIP
RIP parameters. The default is R&T (Receive & Transmit). Other options are R, T, and none.
SH
Enables or disables split horizon on Ethernet. Options are yes or no.
DEFAULT TYPE
The Default Type is where the IP is routed through: IP gateway, RIP protocol, or to the host
CPU IP node. Options are statc (goes to the specified IP gateway), dynam (figures it out
dynamically through RIP protocol) host (sends it to the host CPU IP node) and none.
Parameter User Options Default
STATE actv stdby stdby
ENCAPSULATION Ether 802 Ether
IP INTERFACE <name> <name>
IP MTU 64-1500 64-1500
RIP none R T R&T R&T
SH yes no yes
DEFAULT TYPE none statc dynam host none
DEFAULT GATEWAY n/a ipaddr n/a
PROXY HOST enabl dsable dsable