Zhone Technologies 800 - Manual (Page 135)

Server Cards IMACS System Release 5.1.6 5-29
IPR Card IPR Card Configuration Screens and Settings
Table 5-10. IPR 10B2 and 10BT IP Static Routes Configuration Option Settings and
Defaults
IP NET
A destination IP network address. Enter a valid IP address (e.g. 125.15.0.0).
SUBNET
A subnet mask. Enter a valid subnet mask (e.g. 255.255.0.0).
GOTO
IP address of the next IP gateway for this static route. Enter a valid IP address gateway (e.g.
0.0.0.0).
PVC
Name of the PVC at which this static route is pointed. No name should be entered for the
Ethernet static route. Enter a valid PVC name for the static route to which it points. (e.g.
jones).
DIST
Administrative distance (in hops) for this static route.
Note: The static routes will always be preferred to dynamic routes regardless of the
Distance. This Distance will, however, be advertised in any routing updates for this
static route.
Parameter User Options Default
IP NET A valid IP address 0.0.0.0.0.0.0.0
SUBNET A valid subnet mask 0.0.0.0.0.0.0.0
GOTO A valid IP address 0.0.0.0.0.0.0.0
PVC <name> <name>
DIST 1-15 1-15