ZyXEL Communications 792H - Manual (Page 136)

Prestige 792H G.SHDSL Router
9-2 Firewall Configuration
9.3 Configuring E-mail Alerts
To change your Prestige’s E-mail log settings, click Advanced Setup, Firewall, and then E-mail. The screen
appears as shown. This screen is not available on all models.
Use the E-Mail screen to configure to where the Prestige is to send logs; the schedule for when the Prestige
is to send the logs and which logs and/or immediate alerts the Prestige is to send. An "End of Log" message
displays for each mail in which a complete log has been sent.
Figure 9-2 E-mail
The following table describes the labels in this screen.
Table 9-1 E-mail
LABEL DESCRIPTION
Address Info
Mail Server Enter the server name or the IP address of the mail server for the e-mail addresses
specified below. If this field is left blank, logs and alert messages will not be sent via
e-mail.
Subject Type a title that you want to be in the subject line of the log e-mail message that the
Prestige sends.