ZyXEL Communications 792H - Manual (Page 409)

Prestige 792H G.SHDSL Router
Internal SPTGEN 38-3
Figure 38-2 Invalid Parameter Entered: Command Line Example
The Prestige will display the following if you enter parameter(s) that are valid.
Figure 38-3 Valid Parameter Entered: Command Line Example
38.3 Internal SPTGEN FTP Download Example
Figure 38-4 Internal SPTGEN FTP Download Example
field value is not legal error:-1
ROM-t is not saved, error Line ID:10000000
reboot to get the original configuration
Bootbase Version: V2.02 | 2/22/2001 13:33:11
RAM: Size = 8192 Kbytes
FLASH: Intel 8M *2
Please wait for the system to write SPT text file(ROM-t)...
Bootbase Version: V2.02 | 2/22/2001 13:33:11
RAM: Size = 8192 Kbytes
FLASH: Intel 8M *2
c:\ftp 192.168.1.1
220 PPP FTP version 1.0 ready at Sat Jan 1 03:22:12
2000
User (192.168.1.1:(none)):
331 Enter PASS command
Password:
230 Logged in
ftp>bin
200 Type I OK
ftp> get rom-t
ftp>bye
c:\edit
rom-t
(edit the rom-t text file by a text editor and save
it)
1. Launch your FTP application.
2. Enter "bin".
The command “bin” sets the transfer
mode to binary.
3. Get "rom-t" file.
The command “get” transfers files from
the Prestige to your computer. The
name “rom-t” is the configuration
filename on the Prestige.
4. Edit the "rom-t" file using a text editor (do not use a word processor). You must leave this FTP screen to edit.