Cleaning and maintenance, General cleaning, Pan supports – Zanussi ZXS 646 IT User Manual

Page 6: Ignition candle, Cleaning of the hotplates, Periodic maintenance, Service and original spare parts

Advertising
background image

6

Cleaning and Maintenance

Disconnect the appliance from the electrical
supply, before carrying out any cleaning or
manteinance work.

General cleaning

Wash the enamelled components with warm soapy
water. Never use abrasive cleaners
Frequently wash the "caps" and the "crowns" with hot
soapy water, carefully taking away any built-up of food.
Regularly wipe over the hob top using a soft cloth weel
wrung out in warm water to which a little liquid detergent
has been added. Avoid the use of the following:
- household detergent and bleaches;
- impregnated pads unsuitable for non-stick saucepans;
- steel wool pads;
- bath/sink stain removers.
Should the hob top become heavily soiled, it is
recommended that a proper cleaning product is used.

Pan supports

The pan supports are dishwasher proof.
If the marks are particularly difficult to remove, use
common non-abrasive cleaners or specific products.
Never use steel wool pads or acids.

Ignition candle

The electric ignition is obtained through a ceramic
"candle" and a metal electrode (fig.1-lett. C). Keep these
components well clean, to avoid difficult lighting, and
check that the burner crown holes are not obstructed.

Cleaning of the hotplates

Spills on the hotplates should be removed using warm
water and a soft cloth.
Alternatively, wipe the plates with a drop of olive oil on a
kitchen towel (while the plates are still warm).

Periodic Maintenance

Periodically ask your local Service Centre to check the
conditions of the gas supply pipe and the pressure
adjuster, if fitted.
To ensure the good operation of the hob and its safety
features, it is necessary that the taps are periodically
lubricated.

Fig. 3

FO 2110

Service and original spare parts

This machine, before leaving the factory, has been tested
and studied by many experts and specialists, in order
to give you the best results.

Any repair work which needs to be carried out should be
done with the utmost care and attention.

For this reason we reccomend that for any problem you
contact the dealer who sold it to you, or our nearest
authorized Service Centre,
specifying the nature of the
problem and the particular model
which you own. Always Insist on
genuine original spare parts.

Advertising