2 resetting to the factory default – ZyXEL Communications GS-4012F/4024 User Manual
Page 298
Advertising
GS-4012F/4024 User’s Guide
Chapter 43 User and Enable Mode Commands
297
43.6.2 Resetting to the Factory Default
Follow the steps below to reset the switch back to the factory defaults.
1 Enter
erase running config
to reset the current running configuration.
2 Enter
write memory
to save the changes to the current configuration file. If you want to
reset the second configuration file, use the
write memory
command again with the
specified index number.
The following example resets both configuration files to the factory default settings.
sysname# erase running-config
sysname# write memory
sysname# write memory 2
Advertising