ZyXEL Communications GS-4012F/4024 - Manual (Page 308)

GS-4012F/4024 User’s Guide
Chapter 44 Configuration Mode Commands 307
• Assigns the name “route1” to the static route.
44.6 Enabling MAC Filtering
You can create a filter to drop packets based on the MAC address of the source or the
destination.
Syntax:
mac-filter name <name> mac <mac-addr> vlan <vlan-id> drop <src/dst/both>
where
An example is shown next.
• Create a filtering rule called “filter1”.
• Drop packets coming from and going to MAC address 00:12:00:12:00:12 on VLAN.
sysname(config)# ip route 172.21.1.104 255.255.0.0 192.168.1.2
sysname(config)# ip route 172.21.1.104 255.255.0.0 192.168.1.2 metric 2
sysname(config)# ip route 172.21.1.104 255.255.0.0 192.168.1.2 name route1
name <name> = Names the filtering rule.
mac <mac-addr> = Specifies the MAC address you want to filter.
vlan <vlan-id> = Specifies which VLAN this rule applies to.
drop <src/dst/both> = Selects the behavior of the rule.
• src - drop packets coming from the specified
MAC address
• dst- drop packets going to the specified MAC
address
• both - drop packets coming from or going to the
specified MAC address
sysname(config)# mac-filter name filter 1
sysname(config)# mac-filter name filter 1 mac 00:12:00:12:00:12 vlan 1 drop
both