Zanussi ZOB 383 - Manual (Page 5)

When you connect the appliance to the electrical supply
or in case of a power cut, the Time function indicator
flashes automatically.
To set the current time use " + " or " - " button.
After approximately 5 seconds, the flashing stops and the
display shows the time of day set.
For time change you must not set an automatic
function (Duration or End ) at the same time.
Preheating
1. Set function and maximum temperature.
2. Run an empty oven for 45 minutes.
3. Set function and maximum temperature.
4. Run an empty oven for 15 minutes.
This is to burn off any residue from the cavity surface.
Accessories can become more hot than in normal use.
During this period an odour and smoke can be emitted.
This is normal. Make sure the airflow is sufficient.
Initial Cleaning
• Remove all parts from the appliance.
• Clean the appliance before first use.
Caution! Do not use abrasive cleaning agents! This
can damage the surface. Refer to chapter "Care and
Cleaning".
Daily use
Warning! Refer to "Safety information" chapter.
Switching the Oven On and Off
1. Turn the oven functions control knob to an oven
function.
2. Turn the temperature control knob to a temperature.
The temperature indicator comes on while the oven
temperature increases.
3. To switch off the oven, turn the oven functions control
knob and the temperature control knob to the Off po-
sition.
Oven Functions
Oven function Application
OFF position The appliance is OFF.
Oven lamp Lights up without any cooking function.
Conventional cooking Heats both from the top and bottom element. To bake and roast on one oven level.
Top heating element Heats only from the top of the oven. To finish cooked dishes.
Bottom heating element Heats only from the bottom of the oven. To bake cakes with crispy or crusty bases.
Grill To grill flat food items in small quantities in the middle of the shelf. To make toasts
5