ZyXEL Communications PLA-400 - Manual (Page 30)

Chapter 3 Managing Your PLA-4xx
PLA-4xx Series User’s Guide
30
Figure 16 Network Info Screen
The following table describes the labels in this screen.
Table 4 Network Info Screen
LABEL DESCRIPTION
Adapter This field identifies which powerline network information is displayed. Different
powerline networks are identified by the Ethernet interface (network card) connected
directly to the PLA-4xx. Typically there is only one connection, however, if your
computer has two network cards and both are connected to a PLA-4xx, then you have
two powerline networks.
Central
Coordinator
MAC
The Central Coordinator of the powerline network is the powerline adapter which
keeps track of which devices are part of the network as well as synchronizes
communication within the powerline network. If the Central Coordinator is removed
from the powerline network then another powerline adapter takes its place. This field
displays the MAC address of the PLA-4xx which is the Central Coordinator of the
powerline network. This powerline adapters in your powerline network automatically
select the Central Coordinator.
The information provided in the following table reflects transmission rate information about the
powerline adapters which communicate in your powerline network.
The powerline adapters listed in this table are all the powerline adapters in your powerline network
except the powerline adapter selected in the Configuration page of the configuration utility. In other
words, if the Local powerline adapter is selected in the Configuration screen, then this table will
display the rates of transmission from the powerline adapter connected to the computer running the
configuration utility to all the Remote powerline adapters.
Site This field displays:
•
Local, if it is the PLA-4xx directly connected to the computer running the
configuration utility.
• Remote, if it is a PLA-4xx in your powerline network but not directly connected to
the computer running the configuration utility.
MAC Address This field displays the MAC address of your powerline adapter. The MAC address of
your powerline adapter can be found by looking at the label on your device. It consists
of six pairs of hexadecimal characters (hexadecimal characters are “0-9” and “a-f”). In
the case of the PLA-4xx, this label is on the bottom of the device.