Zephyr CTP-E 60SX - Manual (Page 19)

www.zephyronline.com
17
M
a
int
e
n
a
nce
-
C
le
aning
Surface Maintenance:
Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive detergent , or steel
wool/scouring pads which will scratch and damage surface.
For heavier soil use liquid degreaser.
After cleaning, you may use non-abrasive stainless steel polish/ cleaners, to polish and buff out the stainless luster
and grain. Always scrub lightly, with clean cotton cloth, and with the grain.
Do not use any product containing chlorine bleach. Do not use “orange” cleaners.
Baffle Filters
The Metal Filters fitted by the factory are intended
to filter out residue and grease from cooking. They
need not be replaced on a regular basis but are
requiredto be kept clean.
Filters should be cleaned after every 30 hours of
use. Use the Filter Clean Reminder function on the
controls to determine when filters require cleaning.
Remove and clean by hand or in dishwasher.
Spray degreasing detergent and leave to soak if
heavilysoiled.
Remove filters by sliding away from center of hood
and pulling down.
Dry filters and re-install before using hood.
Replacing Baffle Filters
Should filters wear out due to age and prolonged
use, contact Zephyr to purchase replacements.
Handles