Zoom A2.1U - Manual (Page 39)

ZOOM A2.1u 39
Specifications
Number of effect types 47
Number of effect modules 8 simultaneously usable modules
Patch memory
User area 10 patches x 4 banks
Preset area 10 patches x 4 banks
Sampling frequency 96 kHz
A/D conversion 24-bit, 64-times oversampling
D/A conversion 24-bit, 128-times oversampling
Signal processing 32-bit
Frequency response 20 Hz – 40 kHz +1 dB, -3 dB (10 kilohm load)
Display 2-digit 7-segment LED display, parameter LEDs, pedal assign LEDs
Input Standard monaural phone jack
Rated input level: -20 dBm
Input impedance: 1 megohm
Outputs Standard stereo phone jack (line/headphones)
Line output maximum rating: +5 dBm
(output impedance 10 kilohms or more)
Headphone output maximum rating: 20 mW + 20 mW (into 32-ohm load)
XLR connector (balanced output)
Input/output gain: 0 dB
Output impedance: 100 ohms (HOT-GND), (COLD-GND),
200 ohms (HOT-COLD)
Control input FP02 (FP01)/FS01 input
USB interface
PC interface 16-bit (record/play, stereo)
Sampling frequencies 32 kHz, 44.1 kHz, 48 kHz
Power requirements
AC adapter 9 V AC, 300 mA (ZOOM AC adapter AD-0006)
Batteries Four IEC R6 (size AA) batteries, continuous operating time 6 hours
(with alkaline batteries)
Dimensions 165 (D) x 255 (W) x 79 (H) mm
Weight 1200 g (without batteries)
Optional accessory Expression pedal FP02/Foot switch FS01
* 0 dBm = 0.775 Vrms
* Design and specifications subject to change without notice.
eA21u.fm 39 ページ ２００５年１１月４日 金曜日 午後５時２３分