MAXWELL MW-3013 OG - Manual (Page 8)

ENGLISH
8
STEAM IRON
DESCRIPTION
1 – Water spray nozzle
2 – Water tank lid
3 – Constant steam supply handle/self
clean mode
4 - Spray button
5 - Additional steam release button
6 – Handle
7 – Power cord protection
8 –
Iron base
9 – Heating element on/off indicator
10 –
Water reservoir
11- Temperature regulator
12 – Maximal water level indication
13- Iron sole
SAFETY MEASURES
Before using the unit, please read the in-
structions carefully
• Before switching on the unit,
make sure
that your home electricity supply corre-
sponds to the voltage of current speci-
fied on the unit.
• Power cord is equipped with a euro plug;
insert it into the socket, with secure
grounding.
• While operating, we recommend unwind
the cord at full length.
• In order to avoid risk of fire do not use
adapters while connecting the appliance
to the outlet.
• In order to avoid overloading of the pow-
er network do not switch on several ap-
pliances with high power consumption
simultaneously.
• Use the unit only for the intended pur-
poses.
• Use the iron only on the ironing board.
• Place the iron on a flat stable surface.
• Always take the plug out of the socket
before filling the water tank with water.
• While operating the unit, provide that the
water tank lid is firmly closed
• Close supervision is necessary when
children or disabled persons are near the
unit.
• Never leave the operating unit unattended.
• Always unplug the unit if you do not use
it.
• In order to avoid electric shock do not
immerse the unit into water or other liq-
uids
.
• Do not fill the water tank with scented liq-
uids, vinegar, starch solution, descaling
reagents, chemical agents etc.
• Avoid contact with hot surfaces or out-
going steam of the iron in order to avoid
getting burns.
• Provide that the power cord is not hang-
ing over the edge of the ironing board and
make sure that it does not touch heated
surfaces
.
• To unplug the unit always take it by the
plug, do not pull by the power cord.
• Before taking the unit away for keeping,
pour out the remaining water and let the
unit cool down.
• Pour out water only after you have un-
plugged the unit.
• Do not use the unit if the plug or the pow-
er cord is damaged or if there are other
damages in the unit.
• Do not use the unit if it fell or if there any
damages or in case of leakage.
• In order to avoid electric shock do not
repair the unit yourself. If there are some
damages in the unit apply to the author-
ized service center.
• This unit is not intended for usage by
children or disabled persons unless they
are given all the necessary instructions
on safety measures and information
about danger, which can be caused by
improper usage of the unit.
• Do not allow children to use the unit as a
toy.
BEFORE USAGE
• Take out the iron from the package and
remove the protective cartoon covering
from the iron sole
(13).
• Make sure that the electrical supply volt-
age corresponds to the iron’s operating
voltage.
Note:
The iron’s heating element is broken
in during the first use; it is normal for a
small amount of smoke to be released.
MW-3013.indd 8 MW-3013.indd 8 17.03.2010 17:33:36 17.03.2010 17:33:36