Zanussi DE 6844 A - Manual (Page 7)

7
Press the INTENSIVE SID 80 push button, the
indicator light of the NORMAL push button turns
off, while the indicator light of the INTENSIVE
SID 80 push button remains static for about 5
seconds and then starts to flash indicating the
current level
The current level is indicated by the number of
flashes made by the INTENSIVE SID 80 indicator
light, that alternates 5 seconds off with a number
of flashes, this continues for about 60 seconds.
Example:
1 flash = level 1
2 flashes = level 2
3 flashes = level 3
4 flashes = level 4
5 flashes = level 5
3. To change the level, press the INTENSIVE SID
80 programme push button. Each time the push
button is pressed the level changes.
Example:
If the current level is 3, by pressing the
INTENSIVE SID 80 programme push button
once, level 4 is selected.
If the current level is 5, by pressing the
INTENSIVE SID 80 programme push button
once, level 1 is selected.
The INTENSIVE SID 80 indicator light remains
off for about 5 seconds after which it starts
flashing indicating the new level selected.
4. To memorise the new level, switch off the
dishwasher by pressing the ON-OFF push
button.
If your water is level 1 it is already soft
and therefore there is no need to use salt.
With the setting of the water softener at
level 1 the salt indicator light on the
control panel will always remain off.
Use salt from level 2 upwards.
From level 2 upwards, if salt refilling is
necessary, the salt indicator light will
illuminate only in setting mode and at the
end of the washing programme.
During the run of the programme it will
remain off.
SO391