Yamaha DJX - Manual (Page 18)

18
,,,,,



   
  
@@@@@ AAAA BBBBB CCCCC DDDD EEEEE
FFFFF GGGG HHHHH
PPPPP QQQQ RRRRR SSSSS TTTT UUUUU
VVVVV WWWW XXXXX
,,,,,



   
  
@@@@@ AAAA BBBBB CCCCC DDDD EEEEE
FFFFF GGGG HHHHH
PPPPP QQQQ RRRRR SSSSS TTTT UUUUU
VVVVV WWWW XXXXX
,,,,,



   
  
@@@@@ AAAA BBBBB CCCCC DDDD EEEEE
FFFFF GGGG HHHHH
PPPPP QQQQ RRRRR SSSSS TTTT UUUUU
VVVVV WWWW XXXXX
,,,,,



   
  
The DJX has a variety of settings in the Function parameters.
These give you detailed control over many of the DJX’s features. Here’s how to use them:
z
Press the FUNCTION button.
Step 5 Function Parameters
x
Select a Function number.
For a list of functions, see page 19.
The Function number can be selected
while the “FUNCTION” indication is
flashing.
Enter the Function
number on the
numeric keypad.
the same time, the Function number (“F02”
in the example above) changes automatically
to the current value of the Function param-
eter.
Current value of the selected Function
parameter.
v
Use the numeric keypad to change the
value or setting. For on/off settings, use
the +/- buttons.
Restoring the Default Value
If you’ve changed the parameter setting, you can
instantly restore the default setting by pressing both
+/- buttons simultaneously.
Negative values
To directly enter negative values (for those parameters
that have negative values), simultaneously hold down
the - button and press the desired number button.
F02
FUNCTION
STYLE
M.Octave
F0 0
FUNCTION
STYLE
M.Octave
F0 1
FUNCTION
STYLE
M.Octave
BWD
0
velocity
7 8
rest
9
3
4 5 6
1 2 3
FWD
BWD
0
velocity
7 8
rest
9
3
4 5 6
1 2 3
FWD Press the FUNCTION button;
each press advances through
the numbers. Hold down the
button to continuously
advance through the numbers.
• Since the “FUNCTION” indication flashes for only a
couple of seconds, make sure to select the parameter
quickly after step 1 above.
c
After “FUNCTION” in the display stops
flashing, change the value or setting.
After a couple of seconds, the “FUNCTION”
indication stops flashing and remains lit. At
b
Exit the Function mode.
Once you’ve made all desired settings, press
one of the other mode buttons (SONG,
STYLE, or VOICE).
Using the Function parameters
Using the Function parameters