Yamaha DJX - Manual (Page 59)

59
THE KNOBS
The Control Knobs of the DJX give you enormously expressive control over vari-
ous parts of the sound. You can use the knobs to “tweak” the sound of any one
of the voices (Main, Dual, or Split) as you perform. Or you can use them to
change the sound of individual Parts of the pattern — in real time as the pattern
plays!
1 Turn Part Control on. (Press the PART CONTROL button.)
2 Select the Part you want to control. (Press one of the PART SELECT keys at the
lower end of the keyboard.)
3 Start the pattern. / Start the song.
4 Turn the knobs to change the sound as you play.
USING THE KNOBS
USING THE KNOBS
1
If Part Control isn’t on, turn it on by pressing the
PART CONTROL button.
When you turn on the DJX, Part Control is automatically set to on — so you
may not need to do this step.
To find out whether Part Control is on or not, check the icon window in the
display. If Part Control is on, the icon will look like this:
If Part Control is off, the icon will look like this:
To turn Part Control on/off, press the PART CONTROL button.
001 142 MEASURE
001 142 MEASURE