Zanussi ZHC 950 - Manual (Page 17)

15
Fitting the Chimney Stack
The chimney consists of two sections.
The lower chimney measures 740mm
and the upper chimney (with the
recirculation grilles on either side)
measures 465mm. The overall installed
measurement is min. 870 - max 1200mm.
UPPER CHIMNEY
To fit the upper chimney section item 2.1
expand the chimney slightly to allow it to
be fitted over the brackets item 7.2.1 as
illustrated.
When installed in the recirculation mode
ensure that the recirculation ducting
outlet extension pieces item 14.1 align
correctly with the outlet grilles in the
chimney.
Secure the sides of the chimney to the
brackets using the four screws item
12c (2.9x9.5mm) provided, as illustrated.
LOWER CHIMNEY
To fit the lower chimney section item 2.2
expand the chimney slightly to allow it to
be fitted over the upper chimney item
2.1 and the hood body item 1 as
illustrated.
Secure the sides of the chimney to the
hood body using the two screws item
12c (2.9x9.5mm) provided, as illustrated.
12c
2.1
2.2
2
7.2.1
12c