Yamaha CDC-675 - Manual (Page 14)

1
Stop the unit.
2
If you will select tracks from a disc (or discs) other than
the disc on the Disc 1 tray, make this unit display the
total recorded time of each disc to be used by pressing
the DISC SKIP button in turn.
* Without this operation, the total time of the
programmed tracks will not be displayed during
programming.
3
Press the PROG button to begin programming.
4
If necessary, select a desired disc.
5
Program a desired track by pressing the corresponding
numeric button.
6
Repeat steps 4 – 5 to program more tracks. You can
select the same track again.
7
When the programming is completed;
14
PROGRAM PLAY
You can enjoy listening to your favorite tracks selected from one or more discs in any desired order by programming tracks.
PLAY
PROG
PROG
DISC SKIP
or
2 3 4
DISC
5
(On the front panel)
STOP
2 1
TAPE
SYNCHRO
3 INDEX
PROG CLEAR
8 7 9 0
5 4 6 + I0
DIMMER TEXT/ TIME OPEN/ CLOSE
REPEAT RANDOM MODE DISC SCAN
SEARCH
SKIP OUTPUT LEVEL – +
STOP PAUSE PLAY
DISC SKIP
3
2, 4
5
7 1
2 1
SYNCHRO
3 INDEX
PROG CLEAR
8 7 9 0
5 4 6 + I0
DIMMER TEXT/ TIME OPEN/ CLOSE
REPEAT RANDOM MODE DISC SCAN
SEARCH
SKIP
STOP PAUSE PLAY
DISC SKIP
5
7
3
2, 4
1
CDC-575 CDC-675
DISC SKIP