Zoom ZOOMCAM 100 - Manual (Page 6)

Getting Started
Inserting or Replacing the Batteries
Make sure to power OFF the camera before you change the batteries.
Slide the compartment cover open and insert/replace the 2 AAA alkaline
batteries. After inserting/replacing the batteries, you can immediately use the
camera. Always make sure to download pictures before your batteries run out.
Loss of battery charge may result in loss of stored pictures.
Connect to PC
If you want the camera to work as a PC camera, or if you want to download
pictures to your PC, you simply use the included USB cable to connect the
camera to the USB port of your PC. This camera is compatible with
NetMeeting and other Windows based Video Conferencing applications.
Taking a Picture
Mode Button
The display should show a number, it should not be blank
or show a symbol. If the screen is blank, press the Mode
Button once to turn on the camera. If a symbol is
displayed, press the Mode Button until a number appears
on the display.
Snapshot Press Snapshot button once to take one image.