Xerox MAX 200 - Manual (Page 17)

Getting to know the MAX 200 15
Getting to know the MAX 200
Scanner
Front
No. Name Function
1 Document shelf Place documents face down on the document shelf and feed into the
scanner.
2 Auto mode panel The auto mode panel is used to select the media size, document
feed direction, and mode of operation. When in auto mode the panel
also displays the document size, media type, and media supply
information. For detailed information about the panel, refer to page
29.
3 Touch screen Displays available features and options, messages, and job
information. For detailed information about the touch screens, refer
to page 19.
4 Scanner control panel Contains the numeric keypad, control buttons and the document
counter. For detailed information about the panel, refer to page 21.
5 Power switch Switches the scanner power-on or off. If your system is equipped
with the printer and the scanner switch is positioned to off, power to
the printer is also removed.
6 Document feed direction
panel Displays the document feed direction.
7 Floppy diskette drive The floppy disk drive is used to store stamp data.
8 Document guide The document guide registers the document during the scan
process.