2 security ramifications, 3 key fields for configuring rules, 1 action – ZyXEL Communications ZyXEL ZyWALL 35 User Manual

Page 189: 2 service, 3 source address, 1 action 10.3.3.2 service 10.3.3.3 source address

Advertising
background image

ZyWALL 35 User’s Guide

Chapter 10 Firewall Screens

187

4 What IP services will be affected?

5 What computers on the LAN or DMZ are to be affected (if any)?

6 What computers on the Internet will be affected? The more specific, the better. For

example, if traffic is being allowed from the Internet to the LAN, it is better to allow only
certain machines on the Internet to access the LAN.

10.3.2 Security Ramifications

Once the logic of the rule has been defined, it is critical to consider the security ramifications
created by the rule:

1 Does this rule stop LAN users from accessing critical resources on the Internet? For

example, if IRC is blocked, are there users that require this service?

2 Is it possible to modify the rule to be more specific? For example, if IRC is blocked for all

users, will a rule that blocks just certain users be more effective?

3 Does a rule that allows Internet users access to resources on the LAN create a security

vulnerability? For example, if FTP ports (TCP 20, 21) are allowed from the Internet to the
LAN, Internet users may be able to connect to computers with running FTP servers.

4 Does this rule conflict with any existing rules?

Once these questions have been answered, adding rules is simply a matter of plugging the
information into the correct fields in the web configurator screens.

10.3.3 Key Fields For Configuring Rules

10.3.3.1 Action

Should the action be to Block or Forward?

10.3.3.2 Service

Select the service from the Service scrolling list box. If the service is not listed, it is necessary
to first define it.

See the Predefined Services section

for more information on predefined

services.

10.3.3.3 Source Address

What is the connection’s source address; is it on the LAN, DMZ or WAN? Is it a single IP, a
range of IPs or a subnet?

Note: “Block” means the firewall silently discards the packet.

Advertising